Wax seal stamp maker
Type your initials or drop a logo, and get a round seal die with mirrored, raised artwork, ready to print and fix to a handle. Free STL and 3MF; nothing is uploaded.
Wax seal stamp maker: initials or a logo in, a round seal die out (25 mm default, 20–40 mm), artwork raised 1.2 mm and auto-mirrored, 1.5 mm rim, 12 fonts; circle, heart, hexagon or star outline. Free STL and 3MF in the browser; Detail finer than 0.25 mm comes with any credit pack (from $4.99).
In short: To make a wax seal stamp, type your initials into the tool on this page or drop a logo, monogram or drawing. It opens on a 25 mm round die with a 1.5 mm rim, letters raised 1.2 mm and mirrored, so the impression in the wax reads the right way round.
Change the width to 20–40 mm, pick a font, or switch the outline to a heart, hexagon or star. Download the STL or 3MF for free and print it face up. Glue the die to a wooden handle, a cork or a printed knob. On a 25 mm seal, thin serifs and fine monograms are sharper at detail finer than 0.25 mm, which comes with any credit pack from $4.99. The standard detail is free.
How to use the Wax seal stamp maker
- Type initials (or drop a logo or monogram) into the tool.
- Keep Mirror on so the wax impression reads correctly.
- Set the width (25 mm is the classic seal) and the raised depth (1–1.5 mm).
- Download STL or 3MF and print it face up at 0.08–0.12 mm layers.
- Glue the die to a handle, warm the wax, press for a few seconds and lift straight up.
| MeshShift printed seal | Custom brass seal | |
|---|---|---|
| Artwork | Initials (12 fonts), logo, drawing | Initials or logo |
| Mirroring | Automatic | Done by the engraver |
| Size | 20–40 mm (25 mm default) | Usually 20–30 mm |
| Outline | Circle, heart, hexagon, star | Usually round |
| Ready in | Minutes to print | 1–3 weeks to make and ship |
| Cost | Free (fine detail from $4.99) | Typically $25–60 |
What makes a 3D printed wax seal work
A wax seal die needs three things that a plain logo-to-STL file does not give you:
- Mirrored artwork. The impression is the mirror of the die. The tool mirrors text and logos automatically (the Mirror switch), so letters read the right way in the wax.
- Raised, not engraved, artwork. Raised letters on the die leave crisp recessed letters in the wax, the look people expect from a brass seal. The default raise of 1.2 mm is deep enough to read and shallow enough to release cleanly.
- A rim. The 1.5 mm frame around the die gives the seal its round border and stops wax spilling over the edge.
The result is a flat round die. Most makers glue it to a wooden handle (sold as blank seal handles), a wine cork or a printed knob.
Initials, monograms and logos
- Initials: type one to three letters. The text is laid out on a square canvas for round, hexagon and star outlines, so letters stay centred instead of stretching. Serif fonts such as Roman capitals look most like traditional seals; bold sans fonts are easiest to print.
- Monogram or logo: drop a PNG, JPG or SVG with dark artwork on a light background. The Threshold slider decides which grey becomes raised.
- Wedding seals: two initials with an ampersand, or a simple heart outline, at 30 mm.
Keep strokes at least 0.6 mm wide at the final size; anything thinner will not print on a 0.4 mm nozzle, and very fine lines tend to tear the wax.
Printing and using the seal
Resin printers give the sharpest seals; a 0.4 mm FDM nozzle works for bold initials at 25 mm and above. Print face up at 0.08–0.12 mm layers, no supports.
PLA and resin both survive sealing wax, which is applied at 80–120 °C but cools within seconds on the die. Do not hold the die in the flame and do not leave it pressed into hot wax for long. Chill the die on an ice pack between uses; a cold die releases more cleanly. Some makers brush a little oil or dust mica powder on the face for an easy lift and a metallic finish.
Fine detail for small seals
A 25 mm seal is a tiny print, so detail matters. The free setting samples the artwork every 0.25 mm, which is plenty for two bold initials. For script fonts, thin serifs or a detailed crest, the finer Detail settings (0.15–0.2 mm) keep edges crisp; they come with any credit pack, from $4.99, and the same pack also gives you an AI 3D model from a photo. The free way out is always one click.
Frequently asked questions
Is the wax seal stamp maker free?
Yes. Initials, logos, shapes, mirroring and STL or 3MF download are free with no sign-up, and everything runs in your browser. Only detail finer than 0.25 mm, useful for script fonts on small seals, needs a credit pack.
Does the text need to be mirrored?
Yes, and the tool does it for you: Mirror is on by default for this seal, so the impression in the wax reads correctly. Turn it off only for a decorative plaque.
What size is a wax seal stamp?
Most brass seals are 20 to 30 mm across; 25 mm is the classic size for letters and wedding invitations. Larger 35 to 40 mm seals suit packaging and logos.
Can a 3D printed wax seal take hot wax?
Yes, for normal sealing wax. The wax cools within seconds on the die. Keep the die out of the flame, and cool it between uses. Resin and PLA both work; PETG releases slightly better.
How do I attach a handle?
Glue the die to a blank wooden seal handle, a wine cork or a printed knob with a few drops of CA glue or epoxy. Centre it and let it cure before the first use.



