Home / Miniature from photo
AI · print-ready in about 2 minutes

Make a Custom Miniature From a Photo

One photo of a person, pet or character becomes a tabletop mini on a round base, sized for 28 mm, 32 mm or display scale, ready for a resin or FDM printer.

To make a tabletop miniature from a photo, upload one full-body picture, choose a figure on a round base and set 28–32 mm for D&D scale or 54–75 mm for display. MeshShift builds a watertight mini you can preview free, then download as STL for resin or 3MF for FDM, about $1.67 per mini in a $14.99 pack of 9.

Upload a photo
One clear subject, whole object visible, plain background works best. JPG, PNG, HEIC.
Or try an example photo:
Make it a…

Next model $4.99, no account needed. Failed runs refund automatically.

A 3D-printed grey bust on a round base

Your print-ready model appears here

Closed, manifold, flat-bottomed, on a base, and exactly the height you set.

Upload
Generate 3D
Download
Print prep
One full-body photoRound base, 28–75 mmResin or FDM ready1 free model a day

In short: To make a miniature from a photo, upload one clear, full-body picture of the person, pet or costume in the tool above, choose the figurine template and set the height: about 28 to 32 mm for D&D and Pathfinder heroic scale, 54 to 75 mm for display pieces.

MeshShift builds a closed, watertight figure standing on a round base in about a minute, and you can spin and measure the free 3D preview before you pay. Download it as STL for a resin printer such as an Elegoo or Anycubic, or as a Bambu-ready 3MF for FDM. The first model each day is free to generate, preview and download as STL/3MF without an account; more models use a one-time pack from $4.99 for three models, which is far less than a commissioned sculpt, usually $30 to $150 per figure and days of waiting. For gaming at 28 mm, expect a simplified sculpt: faces and small props hold up best at 54 mm or larger.

How to use the Make a Custom Miniature From a Photo tool

  1. Upload one full-body photo with a plain background.
  2. Choose the figurine template and set the height in mm.
  3. Check the free 3D preview of the mini.
  4. Download STL for resin or 3MF for FDM and print.
Ways to get a custom miniature
OptionLooks like a real person or pet?Typical costTimePrint-ready file?
Commissioned sculptorYes, best faces$30–150+ per figureDays to weeksYes
Character builder (preset parts)No, generic parts onlyFree to design, pay per file30–60 minutesYes
General AI 3D generatorRoughlyMonthly planMinutesOften needs repair and a base
MeshShift miniature from photoYes, simplified sculptAbout $1.67 a mini ($14.99 for 9)About a minuteYes, round base, exact mm

Which scale to pick

  • **28 mm (heroic):** D&D, Pathfinder and most tabletop RPGs. A human-sized mini stands about 30 to 32 mm to the eyes.
  • **32 mm:** modern wargames and many newer RPG lines.
  • **54 mm:** display and painting pieces, where faces start to read clearly.
  • **75 mm:** busts and showcase figures.

Type the full height you want in millimetres; MeshShift scales the model exactly, base included, so it fits your other minis.

Photos that make good minis

Use one sharp photo with the whole body in frame, arms slightly away from the torso, and a plain background. Costume and cosplay photos work well; so do pets standing side-on. Avoid group shots, cropped feet, very wide-angle phone selfies and props held far from the body, such as long swords or staffs. You can add weapons and base decorations later in your slicer or with a kit.

Printing at tabletop size

Resin printers give the best detail at 28 to 32 mm: 0.03 to 0.05 mm layers, the model tilted 30 to 45 degrees, with light supports. FDM printers with a 0.2 mm nozzle and 0.08 mm layers can print 32 mm minis that paint well from a table distance; a 0.4 mm nozzle is fine at 54 mm and up. Prime grey or white and paint as usual. Run the file through the free STL checker first if you rescale it, so you catch walls thinner than about 0.5 mm.

AI mini vs commissioned sculpt vs character builders

**Commissioned sculptors** give the most control and the best faces, but cost $30 to $150 or more and take days. **Character builders** such as HeroForge let you assemble a hero from preset parts, but cannot match a real person's face or your own pet. **AI from a photo** makes a likeness of the person or animal in a minute at a few dollars per model, with a simpler sculpt. Many groups use AI for the whole party, then commission one centrepiece.

Ideas for custom minis

  • **Your player characters:** photograph each player in costume, or use cosplay photos, and print the whole party at the same scale.
  • **Pets as companions:** a dog or cat as an animal companion, familiar or mount, on a 25 mm base.
  • **Villains and NPCs:** photograph a friend in a cloak and you have a recurring villain the table recognises.
  • **Gifts for the DM:** a mini of the dungeon master as a wizard or a boss.
  • **Memorials:** a mini of a late pet or relative for a shelf or a campaign tribute.

Because a pack covers 9 models, you can make the whole party plus a spare and keep the one that prints best. Bases can be magnetised or glued onto a standard 25 mm or 32 mm round base for the grid.

Painting tips for AI minis

AI sculpts have softer detail than hand sculpts, so paint does more of the work. Prime in grey or black, base-coat the large areas, then use a dark wash to pick out folds and features. Dry-brush a lighter shade over raised areas. Paint the eyes last with a fine brush, or leave them as shadow at 28 mm, which often looks better than a misplaced dot. A matte varnish protects the mini from table handling.

Frequently asked questions

Can I turn a photo into a D&D miniature?

Yes. Upload one full-body photo, choose the figurine template and set 28 to 32 mm. You get an STL or 3MF figure on a round base.

How much does a custom miniature from a photo cost?

The first model each day is free to generate, preview and download as STL/3MF. More models use a one-time pack from $4.99 for three models, so about $1.67 per mini.

Resin or FDM for miniatures?

Resin gives the best detail at 28 to 32 mm. FDM with a 0.2 mm nozzle works for 32 mm and is fine with a 0.4 mm nozzle at 54 mm and up.

Will the face be recognisable at 28 mm?

Only roughly; detail is limited by the print itself. For a clear likeness, print at 54 mm or larger, or use the bust template.

Can I make a mini of my pet?

Yes. A side-on photo of the pet standing works best. See the pet figurine page for more tips.

Can I get 3D printed miniatures from a photo?

Yes, in two steps. MeshShift turns the photo into a printable mini file (STL or 3MF, 28 or 32 mm, with a round base); the first one each day is free to download. You then print it on your own resin or FDM printer, or upload the STL to a print service or a local maker space to get the physical miniature.

How big should a 3D printed miniature be?

28 mm "heroic" scale and 32 mm are the tabletop standards for a human-sized figure measured to the eyes. Set the height in the tool before you download; Large creatures are usually printed at about 50 mm on a 50 mm base.