Lithophane ornament maker
Drop a photo, pick a round, heart, star or Christmas-tree outline, and download a lithophane ornament with a frame and a loop for the ribbon. Free STL and 3MF; nothing is uploaded.
Lithophane ornament maker: photo in, a framed lithophane ornament out, in circle, heart, star, Christmas tree, hexagon or rounded-square shape. Star and tree get a hanging loop above the tip (one piece with the frame). Laid out upright for printing. Free STL and 3MF in the browser; Detail finer than 0.25 mm comes with any credit pack (from $4.99).
In short: To make a lithophane ornament, drop a photo into the tool on this page. It opens on a round 80 mm ornament with a 3 mm frame and a hanging loop; switch the shape to heart, star, Christmas tree, hexagon or rounded square if you like.
Dark parts of the photo become thick plastic (3.2 mm by default) and light parts thin (0.8 mm), so the picture appears when the ornament hangs in front of tree lights or a window. Star and tree shapes get a loop above the tip instead of a hole through the picture. The panel is laid out upright, which is how lithophanes print best. Download STL or 3MF for free; detail finer than 0.25 mm, worth it for faces on a small ornament, comes with any credit pack.
How to use the Lithophane ornament maker
- Drop a photo with a clear face or subject; crop it close first.
- Pick the shape: circle, heart, star, Christmas tree, hexagon or rounded square.
- Set the width (60–90 mm is a good ornament size) and the loop size (4 mm fits ribbon).
- Check the preview with the light behind it, then download STL or 3MF.
- Print upright in white PLA at 100% infill and hang it in front of the tree lights.
| Setting | Default | Range / options |
|---|---|---|
| Shape | Circle | Circle, heart, star, Christmas tree, hexagon, rounded, rectangle |
| Width | 80 mm | 20–250 mm |
| Thinnest / thickest | 0.8 / 3.2 mm | 0.4–2 / 1.5–6 mm |
| Frame | 3 mm | 0–8 mm |
| Hanging loop / hole | 4 mm | 0–8 mm; above the tip on star and tree |
| Print orientation | Upright | Flat or curved (0–180°) |
| Detail | 0.25 mm (free) | 0.15–0.2 mm with any pack |
| Price | Free STL and 3MF | Fine detail from $4.99 |
Why a lithophane makes a better photo ornament than a printed picture
A lithophane is a thin plastic panel whose thickness follows the brightness of a photo. Unlit, it looks like a white embossed disc; with light behind it, the photo appears in soft grey tones, sharp enough to recognise faces and pets. On a Christmas tree the string lights do the work, which is why lithophane ornaments are one of the most-printed holiday gifts.
Compared with a photo ornament from a print shop, a printed lithophane costs a few cents of filament, takes an hour or two to print, and can be made the evening before you need it. Because the shape and loop are part of the file, there is nothing to glue: print, thread a ribbon, hang.
Ornament shapes and the hanging loop
The shape menu cuts the lithophane to an outline and wraps it in a solid frame, so the thin picture area is protected on every edge:
- Circle and hexagon: the classic bauble look; the photo centre stays in the middle.
- Heart: for couples, first-Christmas and memorial ornaments.
- Star and Christmas tree: pointed outlines. A hole near the top would cut through the tip, so the tool adds a hanging loop above the tip instead, joined to the frame as one piece.
- Rounded square and rectangle: for wider photos such as a family group.
The loop slider sets the hole diameter; 4 mm takes ribbon or an ornament hook, 6–8 mm takes a thicker cord. Every combination is checked to export as a single closed solid, so the loop never prints as a loose part.
Settings that make faces readable
- Thinnest 0.8 mm and thickest 3.2 mm suit most white PLA. Thinner than 0.6 mm lets light bleed through; thicker than 3.5 mm makes shadows too dark behind small string lights.
- Width: 60–90 mm. Smaller ornaments lose facial detail; for anything under 70 mm use a finer Detail setting.
- Detail: 0.25 mm per sample is free and works for most photos. At 0.15–0.2 mm, eyes and hair stay crisp on a 60 mm ornament; that finer setting comes with any credit pack.
- Frame: 2–4 mm. The frame is what you hold, and it keeps the thin centre from cracking.
- Smoothing: 1 px removes JPEG noise without blurring faces.
How to print a lithophane ornament
- Use white or natural PLA. Coloured filament blocks too much light.
- Print it standing up, as the file is laid out: the vertical layers give finer tone steps than printing flat.
- 100% infill, or at least 4 walls with a 0.4 mm nozzle, so every thickness is solid plastic.
- Layer height 0.12–0.16 mm; slow outer walls help the photo detail.
- A brim of 5 mm keeps the tall thin panel from tipping on bed-slingers.
A 70 mm ornament takes about 1.5 hours on a current printer and uses around 10 g of filament.
Frequently asked questions
Can I make a lithophane ornament for free?
Yes. Shapes, frame, loop and STL or 3MF download are free with no sign-up, and the photo never leaves your browser. Only detail finer than 0.25 mm needs a credit pack, from $4.99.
Which shape works best for a Christmas ornament?
A circle or hexagon looks like a classic bauble and keeps the photo centred. Star and tree outlines are more festive but crop more of the picture, so choose a photo with the subject in the middle.
Where does the hanging loop go on a star or tree?
Above the tip. A hole through the top point would cut the outline, so the tool adds a ring above it that is joined to the frame and exports as one piece with the ornament.
What size should a lithophane ornament be?
60 to 90 mm wide. Below 60 mm, faces get hard to read even at fine detail; above 90 mm the ornament gets heavy for a small branch.
Do I need a light inside the ornament?
No. Hang it in front of the tree lights or in a window; the light behind it shows the photo. For a lamp that lights itself, see the lithophane night light page.



