Home / 3D print yourself
AI · print-ready in about 2 minutes

3D Print Yourself From One Photo

Upload a full-body photo or a portrait. Get a mini me figurine or a bust on a base, ready to print at home, with no 3D scanner or booth visit.

You can 3D print yourself without a scanner or booth: one clear front-facing photo is enough for an AI generator to make a figurine or bust. MeshShift returns a closed, watertight model with a flat base at the exact height you choose in millimetres, as an STL or Bambu-ready 3MF. Your first model each day is free to generate, preview and download as STL/3MF; print it at home or with a print service.

Upload a photo
One clear subject, whole object visible, plain background works best. JPG, PNG, HEIC.
Or try an example photo:
Make it a…

Next model $4.99, no account needed. Failed runs refund automatically.

A 3D-printed grey bust on a round base

Your print-ready model appears here

Closed, manifold, flat-bottomed, on a base, and exactly the height you set.

Upload
Generate 3D
Download
Print prep
One photo, no scannerFigurine or bustExact height in mmSTL + Bambu-ready 3MF

In short: To 3D print yourself, upload one clear photo to the MeshShift AI tool above. Pick Figurine for a full-body mini me, or Bust for head and shoulders, and set the height in millimetres. The AI builds the whole figure, including the back and sides the photo does not show, as one watertight solid on a flat base.

Check the free 3D preview in about a minute, then download an STL or a Bambu-ready 3MF and print it at home or at a local print shop. You do not need a 3D scanner, dozens of photos or a scanning booth. The result is a stylised likeness rather than an exact scan: clothing, hair and pose come through well, while fine facial detail depends on the print size, so faces look best at 80 mm or taller, or as a bust. The first model each day is free to generate, preview and download as STL/3MF, and failed runs are refunded.

A 3D printed bust made from a single portrait photo
One portrait photo → printed bust on a plinth, sized in mm.

How to use the 3D Print Yourself From One Photo tool

  1. Take a full-body photo for a figurine, or a portrait for a bust.
  2. Upload it, pick Figurine or Bust, and set the height.
  3. Check the free 3D preview from every side.
  4. Download the STL or 3MF, print, and paint.
Ways to get a 3D print of yourself
OptionWhat you needTypical costTime
3D scanning boothVisit a studio in personAbout $100–300+ per figureDays to weeks
Phone 3D scan appSomeone to circle you, steady lightFree to a few dollars, plus repairAn hour or more
Commission a 3D artistSeveral photos and revisionsAbout $50–200+Days
AI from one photo (MeshShift)One clear front photo1 free model a day, download included; packs from $4.99About a minute

Photo, booth scan or AI: the ways to make a mini me

  • **Scanning booth:** captures your exact shape in full colour, but you have to find one, and printed figures typically cost $50 to $300.
  • **Phone 3D scanning apps:** free or cheap, but you need someone to walk around you holding still for a minute, and the mesh usually needs cleanup.
  • **Commissioned sculpt from photos:** a good likeness, $40 to $200 and several days.
  • **AI from one photo (MeshShift):** minutes, one photo, a print-ready file in millimetres. A stylised likeness that you paint yourself.

Taking a photo that makes a good figurine

  • Whole body in frame, head to feet, nothing cropped.
  • A simple standing pose with arms slightly away from the body.
  • Even daylight, no harsh shadows on the face.
  • A plain wall behind you.
  • Fitted clothing reads better than very loose layers.
  • Remove sunglasses; glasses with thin frames may be simplified.

For couples, wedding cake toppers or family figures, generate each person from their own photo and arrange them on one plate in your slicer.

Size and print settings

A mini me of 80 to 120 mm keeps the face readable on an FDM printer with 0.12 mm layers and tree supports. For a desk bust, 60 to 80 mm is enough because the head fills the model. Resin printers hold more facial detail at smaller sizes. Prime in grey, then paint skin, hair and clothes with acrylics; a wash brings out folds and features.

Gift ideas

Mini me figures make good birthday, graduation and retirement gifts, cake toppers, desk figures for a team, and keepsakes of grandparents. A bust on a plinth suits a trophy or award. Because you print it yourself, you can make several sizes or one for each family member for the price of a single commission.

Painting and finishing your figurine

Print in white or grey PLA so paint covers evenly. Sand layer lines lightly with 220 then 400 grit, or print at 0.12 mm layers for a smoother face. Prime with a spray primer, then paint skin, hair and clothes with acrylics; a wash of thinned brown paint brings out the eyes and folds. Seal with matte varnish. On a multi-colour printer you can instead split the 3MF by colour in the slicer. Resin printers give the finest faces at small sizes, around 50–80 mm tall.

Frequently asked questions

Can I make a figurine of a couple, a family or a pet together?

Single people and single pets work best. For a couple or family, make one figure per person from separate photos and print them side by side on a shared base, which also lets you choose each pose and size.

Can I 3D print myself without a 3D scanner?

Yes. One photo is enough. The AI predicts the sides and back and returns a printable figurine or bust.

Will it look exactly like me?

It is a stylised likeness, not a scan. Pose, clothes and hair come through well; the face is clearer at larger sizes or as a bust.

How much does it cost?

The first AI model each day is free to generate, preview and download as STL/3MF. More models need a one-time pack from $4.99 for three models, with no subscription. Failed runs are refunded.

Is my photo stored?

No. Your photo is used only to build the model and is deleted afterwards. It is never published.

Can I print it in colour?

The model is single colour, which suits paint. With a multi-colour printer you can paint regions in Bambu Studio and print from the 3MF.