Home / PNG to 3MF
Free · runs in your browser

PNG to 3MF: Images to a Slicer-Ready 3MF

Turn a PNG logo, icon or picture into a 3MF that opens in Bambu Studio, OrcaSlicer and PrusaSlicer at the right size, with millimetre units built in.

Drop an image to make it 3D
PNG, JPG, WebP, SVG or iPhone HEIC · choose a file
Free · runs in your browser · nothing is uploaded
Try:
Files stay on your deviceNo sign-up for free toolsSTL · 3MF · STEP · OBJ · GLBWatertight, slicer-ready output

In short: To convert PNG to 3MF, drop the PNG into the MeshShift image tool and choose stamp for logos and icons (dark areas raised to one height on a plate), relief for a plaque, or lithophane for a backlit photo panel.

Set the width in mm and the heights, check the 3D preview, then download. 3MF export from this tool is free and unlimited, just like STL, and you can also turn an STL into a 3MF with the free STL to 3MF converter on the same site. Either way the 3MF stores millimetre units, so it opens at the size you set instead of being scaled 25.4× by a slicer guessing inches. Transparent PNG backgrounds become the plate. There is no account, watermark or file limit on the 3MF download. It opens as a ready object in Bambu Studio, OrcaSlicer and PrusaSlicer. Everything is built in your browser, so the image is never uploaded. A PNG becomes a flat-backed shape; for a full figure from a picture, use the AI image to 3D tool.

How to use the PNG to 3MF tool

  1. Drop the PNG into the tool.
  2. Choose stamp, relief or lithophane and set the width in mm.
  3. Check the 3D preview.
  4. Download the 3MF (or the STL), both free.
  5. Open the 3MF in Bambu Studio, OrcaSlicer or PrusaSlicer.

Why 3MF instead of STL

STL stores triangles and nothing else, not even units. A slicer opening an STL has to assume millimetres, and when a file was made in inches it comes in tiny or 25.4 times too big. 3MF is a zipped XML format from the 3MF Consortium (Microsoft, Autodesk, Prusa, Ultimaker and others) that records the unit, so the size you set is the size you get.

3MF is also the project format of Bambu Studio and OrcaSlicer and is native in PrusaSlicer and Cura. It is smaller than a binary STL of the same mesh and can carry several parts, colours and print settings in one file, which is why many makers keep everything in 3MF.

Logos and icons: getting clean edges

  1. Use the largest PNG you have. A 512-pixel logo printed 80 mm wide has about 6 pixels per millimetre, which is enough; a 64-pixel favicon is not.
  2. Choose Stamp and move the threshold until the preview shows solid letters and no specks.
  3. Turn on Invert for light logos on dark backgrounds.
  4. 1 to 2 mm raised height on a 1.6 mm base reads well on a 0.4 mm nozzle.
  5. For a two-colour print in Bambu Studio, use the layer height where the logo starts as a colour change, or paint the top faces after import.

Free path and pack path

  • Free: the image tool exports 3MF directly in one step, with no account and no limits.
  • Optional: download the STL and convert it with the free STL to 3MF converter. Any pack also unlocks finer detail settings; packs are one-time payments, not subscriptions, and also give you AI 3D models from photos.

Both paths produce the same geometry: a closed, watertight solid with millimetre units.

Slicer tips for PNG prints

Place stamp and relief prints flat on the bed, with 0.12 to 0.16 mm layers to keep edges crisp. In Bambu Studio and OrcaSlicer, the 3MF opens as one object; if the slicer asks whether to load it as a project, choose to import geometry only. Lithophanes print standing upright at 100 % infill in white PLA. For a coaster or sign, add a brim if the plate is thin and wide, so the corners do not lift while the raised logo prints.

Frequently asked questions

Is PNG to 3MF free?

Both STL and 3MF export from the image tool are free and unlimited, and the free STL to 3MF converter can also turn an STL into a 3MF.

Will the 3MF open at the right size in Bambu Studio?

Yes. 3MF stores millimetre units, so the width you set in the tool is the width in Bambu Studio, OrcaSlicer and PrusaSlicer.

What happens to the transparent background of my PNG?

Transparent pixels count as background. In stamp mode they become the flat plate, and only the logo itself is raised.

Can I make a two-colour logo from a PNG?

Yes. Export the stamp, then in Bambu Studio or OrcaSlicer add a colour change at the layer where the raised logo begins, or paint its top faces with an AMS colour.

Is my PNG uploaded?

No. The image is read and the 3D model is built in your browser. Nothing is sent to a server.