Custom Pet Figurine From a Photo, Ready to 3D Print
Upload one photo of your dog, cat or other pet. Get a 3D figurine on a base in minutes, preview it free, and print it at home or send it to a print shop.
To turn a dog or cat photo into a 3D printable figurine, upload one clear photo of your pet: MeshShift's AI builds a closed, watertight figure on a round base at the exact height you choose, as STL or Bambu-ready 3MF. Your first model each day is free to generate, preview and download as STL/3MF with no sign-up; more models need a one-time pack from $4.99 for 3 models. Photos are deleted and never shown publicly.
Next model $4.99, no account needed. Failed runs refund automatically.

Your print-ready model appears here
Closed, manifold, flat-bottomed, on a base, and exactly the height you set.
In short: To make a custom pet figurine, upload one clear photo of your dog, cat, rabbit or other pet to the MeshShift AI tool, keep the figurine template and set the height, for example 80 mm. The AI builds the whole animal, including the side and back the photo does not show, as one watertight solid on a round base.
You see a free 3D preview within about a minute, then download an STL or a Bambu-ready 3MF and print it on your own printer or at a local print service. It costs far less than a commissioned pet sculpture, which usually runs $40 to $150 and takes days, and you can try again with another photo until it looks like your pet. The first model each day is free, download included with no sign-up. For a memorial piece, a lithophane of the same photo, which glows when lit from behind, can be made free in the image tool.

How to use the Custom Pet Figurine From a Photo tool
- Pick a photo where your pet's whole body is visible, ideally standing or sitting side-on or three-quarter.
- Upload it and keep the Figurine template, or choose Bust for just the head.
- Set the height in millimetres.
- Check the free 3D preview and try another photo if needed.
- Download the STL or 3MF and print, then paint.
Choosing the best photo of your pet
The photo decides most of the result.
- **Whole body in frame:** paws, tail and ears all visible, nothing cut off.
- **Three-quarter or side view:** shows both the face and the body length. A straight-on face photo works better as a bust.
- **Even light outdoors or by a window:** dark fur in dim light loses its shape.
- **Plain background:** a sofa with a busy pattern can blend into the outline.
- **Pet's eye level:** get down to the floor rather than shooting from above.
Long-haired pets come out with a smoothed coat; the fur texture is suggested, not strand by strand. Very fluffy breeds may look rounder than in life, so a photo just after grooming helps.
Size, base and print settings
A desk figurine is usually 60 to 100 mm tall. At 80 mm, an FDM print in PLA at 0.12 mm layers with tree supports takes about 4 hours on a Bambu A1 and needs around 30 g of filament, well under $1 of material. Smaller than 50 mm, eyes and noses get lost on FDM; use a resin printer or choose a bust so the head is bigger. The round base is part of the model, so the figure stands without glue and the slicer does not need a raft. Write a name or date on the base with a paint pen, or add raised text in your slicer.
Painting to make it look like your pet
- Sand any support marks and wipe off dust.
- Spray a grey or white primer.
- Block in the main fur colour with acrylics, then the patches and markings, using the photo as a guide.
- Dry-brush a lighter shade over the fur to bring out texture.
- Paint the eyes and nose last with a gloss coat so they catch the light.
If you have an AMS, the Bambu Studio paint tool can assign filament colours to areas before printing instead.
Gifts and memorials
Pet figurines are popular as birthday and holiday gifts and as memorials. Since the file is yours, you can print several sizes, such as a small keychain and a shelf figure, or send the STL to family members to print themselves. For a memorial, many owners pair the figurine with a lithophane of their favourite photo, which the free image tool makes without uploading the picture. If you sell pet figurines, the Studio pack gives 20 models for $24.99 with no subscription.
Frequently asked questions
Can I make a 3D model of my dog from just one photo?
Yes. The AI predicts the hidden side and back from one photo. A side-on or three-quarter view with the whole dog in frame gives the most accurate body shape.
How much does a custom pet figurine cost?
The first model each day is free, download included. After that, models come in one-time packs from $4.99 for three. Printing an 80 mm figure yourself uses about $1 of PLA; a local print service usually charges $10 to $30.
Does it work for cats, rabbits and birds?
Yes. Cats, rabbits, birds, reptiles and horses all work. Thin parts such as bird legs or whiskers are thickened so they print, and very fine detail is simplified.
Can I print it without a 3D printer?
Yes. Download the STL and upload it to a print service such as a local library, maker space or an online service like Craftcloud or JLC3DP, which ship the print to you.
What if it does not look like my pet?
Try a different photo first, ideally with clearer light and the whole body visible. The preview is free to check before you pay for anything.
Can I make a memorial figurine from an old or low-quality photo?
Often, yes, if the pet's outline is clear. Blurry, very dark or heavily cropped photos give weaker shapes. Brighten a dark photo first, and choose the one where the whole body is visible over a sharper close-up.
What size should a pet memorial figurine be?
60 to 100 mm suits a shelf or desk next to a photo frame. 120 to 150 mm gives more detail and presence. The height you enter is exact, so the figure prints at that size without rescaling.



